******* Product Information *******
----------------------------------
Product Name: KURO-BOX(IETSUNA)
          VER: 1.02
         Date: 2004/4/16 11:46:41
----------------------------------
Firmware check:done.

>>root=/dev/hda1
Now Loading...done.
Now Booting
Memory BAT mapping: BAT2=64Mb, BAT3=0Mb, residual: 0Mb
Linux version 2.4.17_kuro-box (root@toda_dev.melcoinc.co.jp) (gcc version 2.95.3 20010315 (release/M
ontaVista)) #4 2004年 4月 16日 金曜日 11:45:05 JST
KURO-BOX (C) 2004 KUROUTO-SHIKOU.
On node 0 totalpages: 16384
zone(0): 16384 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/hda1
OpenPIC Version 1.2 (1 CPUs and 139 IRQ sources) at 80040000
decrementer frequency = 24.407615 MHz 
rtc sec count 1086526317
Calibrating delay loop... 129.84 BogoMIPS
Memory: 60532k available (1124k kernel code, 520k data, 188k init, 0k highmem)
Dentry-cache hash table entries: 8192 (order: 4, 65536 bytes)
Inode-cache hash table entries: 4096 (order: 3, 32768 bytes)
Mount-cache hash table entries: 1024 (order: 1, 8192 bytes)
Buffer-cache hash table entries: 4096 (order: 2, 16384 bytes)
Page-cache hash table entries: 16384 (order: 4, 65536 bytes)
POSIX conformance testing by UNIFIX
PCI: Probing PCI hardware
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
Disabling the Out Of Memory Killer
Journalled Block Device driver loaded
pty: 256 Unix98 ptys configured
BUFFALO INC. RTC driver ver 1.00
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
ttyS00 at 0x80004600 (irq = 138) is a 16550A
ttyS01 at 0x80004500 (irq = 137) is a 16550A
block: 128 slots per queue, batch=32
RAMDISK driver initialized: 16 RAM disks of 10000K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
CMD680: IDE controller on PCI bus 00 dev 60
CMD680: chipset revision 2
CMD680: 100% native mode on irq 17
    ide0: BM-DMA at 0xbffed0-0xbffed7, BIOS settings: hda:pio, hdb:pio
    ide1: BM-DMA at 0xbffed8-0xbffedf, BIOS settings: hdc:pio, hdd:pio
hda: HDS722580VLAT20, ATA DISK drive
ide0 at 0xbffef8-0xbffeff,0xbffef6 on irq 17
hda: 160836480 sectors (82348 MB) w/1794KiB Cache, CHS=10011/255/63, UDMA(100)
Partition check:
 hda: hda1 hda2 hda3
loop: loaded (max 8 devices)
FLASHDISK:Initialized [FUJITSU MBM29PL32TM] 
Linux Tulip driver version 0.9.15-pre9 (Nov 6, 2001)
tulip0:  MII transceiver #1 config 3100 status 7849 advertising 05e1.
eth0: ADMtek Comet rev 17 at 0xbfff00, 00:07:40:A4:27:DE, IRQ 16.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 4096 bind 4096)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
NET4: AppleTalk 0.18a for Linux NET4.0
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 2077k freed
Boot from /dev/hda1.
VFS: Mounted root (ext2 filesystem).
Boot from /dev/hda1.
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
change_root: old root has d_count=2
Trying to unmount old root ... okay
Freeing unused kernel memory: 188k init
modprobe: modprobe: Can't locate module char-major-4
INIT: version 2.78 booting
Activating swap...
Adding Swap: 257032k swap-space (priority -1)
EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,1), internal journal
Checking all file systems...
Parallelizing fsck version 1.22 (22-Jun-2001)
Setting kernel variables.
Calculating module dependencies... done.
Loading modules: 
Mounting local filesystems...
mount: none already mounted or /dev/pts busy
mount: according to mtab, devpts ikjournald starting.  Commit interval 5 seconds
s already mounteEXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,3), d on /dev/pts
internal journal
EXT3-fs: mounted filesystem with ordered data mode.
/dev/hda3 on /mnt type ext3 (rw,noatime)
Cleaning: /tmp /var/lock /var/run.
Hostname KURO-BOX
Configuration network interface: lo eth0
Hostname: KURO-BOX, 192.168.11.150
Checking share directory information: done.
Netatalk configration file generating...
Samba configration file generating...
Initializing random number generator... done.
Starting system log daemon: syslogd klogd.

/dev/hda:
 setting standby to 241 (30 minutes)
INIT: Entering runlevel: 2
umount: /proc/bus/usb: device is busy
Starting internet superserver: inetd.
Start services: thttpd
Start services: lpd
Starting periodic command scheduler: cron.
Starting AppleTalk services: (backgrounded)
Start services: smbd nmbd
Start services: ppc_uartd

Kroutoshikou KURO-BOX (IETSUNA)
kernel 2.4.17_kuro-box on ppc

KURO-BOX login: